Maintenance
IMER Mixer and Pump Cleaning, Storage and Winter Care
End-of-shift cleaning, freeze draining and storage steps from the IMER manuals for the Mix 750, Mix 120 Plus, Step-Up 120, Small 50, Koine 4 and more.
5 min read
01Where it fits
Where this part sits on your machine
Also on this drawing
All 41 parts on Drawing 1, Machine Structure02Fits
Fits these machines
8 machines · 7 IMER parts books
From IMER parts books 3231790 r07 (2018-09), 3231378 r05 (2019-06), 3210929 r01 (2012-12), 3230425 r07 (2019-02), 3226875 r16 (2018-09), 3228768 r12 (2019-02), 3209290 r11 (2019-02).
03Where it sits
Ref 25 on the Combicut 350 iPower drawing
04Specifications
Part details
This screw M10x65 is a genuine IMER part, part number 2222148. The IMER Step-Up 120 parts book lists it as ref. 24 in Table 15, Mixing Gear Box (the gear box of the mixer offered as an optional accessory for the Step-Up 120), with the note TE 5737 M10x65.
The same part number is listed in the Mortarman 120 Plus gear box (3226385, ref. 24) and the Syntesi 300-350 gear box (Table 2/B, ref. 13), on the Workman II 250 (Drawing 1.3, ref. 57) and the Minuteman (frame and drum assembly, ref. 19), and on the Masonry 350 Smart Cut and Combicut 350 iPower saws (machine structure, refs. 19 and 25). Those books describe it as bolt or screw M10x65, 5737.
Check the part number against the parts book for your machine before ordering, or contact us with your machine's model and serial number.
05Used with
Often replaced together
Wear parts next to it on the same drawing
06Documents
Parts books
Guides
Guides for this part
Troubleshooting
IMER Pump Rotor and Stator Wear: Signs, Checks, Parts
Falling material flow or a BLOC message on an IMER Step-Up 120, Small 50 or Koine 4? What the manuals say to check, how to swap the pump, and the parts listed.
4 min read
Answers
Questions about the machines it fits
07Shipping & returns
Shipped from the USA
Fit check
Not sure it fits?
Send us the model and serial number from the machine’s serial plate, or a photo of it. A parts specialist checks the fit against the IMER parts books before the part ships.