Troubleshooting
IMER Pump Rotor and Stator Wear: Signs, Checks, Parts
Falling material flow or a BLOC message on an IMER Step-Up 120, Small 50 or Koine 4? What the manuals say to check, how to swap the pump, and the parts listed.
4 min read
01Where it fits
Where this part sits on your machine
Also on this drawing
All 27 parts on Drawing 4, Blade Protection Motor Assembly02Fits
Fits these machines
5 machines · 4 IMER parts books
From IMER parts books 3226123 r07 (2018-09), Combicut 250 VA, 3227118 r14 (2018-09), 3225890 r11 (2018-09).
03Where it sits
Ref 23 on the Combicut 200 VA drawing
04Specifications
Part details
This M6 nut is a genuine IMER part, part number 2223280. The IMER parts books list it as ref. 23 in the blade protection motor assembly (Table 4) of the Combicut 200 VA, Combicut 250/1000 VA, Combicut 250/1500 VA and Combicut 250 VA saws, where it is described as nut 5588 M6.
The Small 50 parts book lists it as ref. 5 in the Vibrating Screen 1107548 (Table 4), described as nut 5588 D6 Z. Check part number 2223280 against your machine's parts list before ordering.
05Used with
Often replaced together
Wear parts next to it on the same drawing
06Documents
Parts books
Guides
Guides for this part
Maintenance
IMER Mixer and Pump Cleaning, Storage and Winter Care
End-of-shift cleaning, freeze draining and storage steps from the IMER manuals for the Mix 750, Mix 120 Plus, Step-Up 120, Small 50, Koine 4 and more.
5 min read
Answers
Questions about the machines it fits
07Shipping & returns
Shipped from the USA
Fit check
Not sure it fits?
Send us the model and serial number from the machine’s serial plate, or a photo of it. A parts specialist checks the fit against the IMER parts books before the part ships.