Answer
IMER's product sheet lists the Small 50 EVO at 120 V and the Small 50 PLUS at 240 V single phase. For the 115 V, 60 Hz version in the manual: supply cable 3 x 2.5 mm² up to 30 m, a maximum line current of 15 A, and a single-phase generator of at least 6 kVA. Avoid extension leads wound on a drum, and use a cable suited to frequent movement, with an abrasion-resistant sheath. The machine is protected against power loss, so after an outage turn the main switch from 0 to 1 to restart. Error ERR08 appears when voltage drops below 85 V on 115 V versions.
Source
Was this answer helpful?
Reviewed by our parts specialists from IMER manuals and parts books. Check the part number on your machine or in its parts book before you order. Not sure? Ask a parts specialist.