Answer
If the machine and compressor are dead and the blue light is off, check the power: fuses at the site panel, the connector, a loose cable, and that the main switch is on. If the blue lamp is on and the compressor runs but the pump does not, check that the selector is on start, the hopper grid is fitted, the plug is fully inserted, and whether a remote control is connected, since it takes over. A dirty or clogged spray nozzle can also hold the machine up; clean it with the special tool or start from the remote. A supply voltage above 250 V also stops it.
Was this answer helpful?
Reviewed by our parts specialists from IMER manuals and parts books. Check the part number on your machine or in its parts book before you order. Not sure? Ask a parts specialist.