Reviewed by parts specialists

Answers about IMER machines and parts

Real questions about IMER mixers, mortar pumps, saws and lifts, answered from IMER manuals and parts books, with the part numbers and drawings that go with them.

answers: 69
machines covered: 37

Genuine IMER OEM parts
Fit checked

Machine not working right? Troubleshooting guides from the IMER manuals

3 answers

How do I lower an IM 3540 scissor lift platform if it is stuck up in the air?
When a fault leaves the platform stuck in the raised position, a person on the ground can bring it down by hand using the emergency lowering handle at the rear left…
Operation and setup · IMER IM 3540
What should I check before using an IM 3540 / 3546 scissor lift?
The manual asks for a visual check and then an operating check each time. Visually, make sure there is no oil leakage from hoses or hydraulic parts, no cut or…
Operation and setup · IMER IM 3540
What oil and service intervals apply to IMER scissor lifts and IM-R lifts?
On the IM 3540 and 3546, check hydraulic oil with the platform fully down; the level should sit roughly 2 cm below the cap. If you must top up, use oil with the same…
Maintenance · IMER IM 3540 · IMER IM R 13 T

Didn't find your answer? Ask a parts specialist

We reply by email, from IMER manuals and parts books. Questions are not published.

Answers describe what IMER manuals and parts books say. Check the part number on your machine or in its parts book before you order, or send a photo of the serial plate.

Step 1: Family

Step 2: Model

Step 3: Assembly

Machine families

Featured machines

Answers about IMER machines and parts

3 answers

How do I lower an IM 3540 scissor lift platform if it is stuck up in the air?

What should I check before using an IM 3540 / 3546 scissor lift?

What oil and service intervals apply to IMER scissor lifts and IM-R lifts?

Didn't find your answer? Ask a parts specialist