Answer
The Mix 120 Plus has a 1.4 kW (2 hp) single-phase 115 V, 60 Hz motor drawing about 14.5 A. At full load the supply voltage must stay between 103 V and 126 V. Use a 2-pole plus ground cable so the machine connects to the site's earthing system, with a residual current device and circuit breaker on the line. For the 14.5 A load, the manual's cable table is: 1.5 mm² up to 12 m, 2.5 mm² for 13 to 19 m and 4 mm² for 20 to 30 m. Do not use cable reels, and use an outer jacket that resists crushing, wear and weather. Keep plugs and sockets dry.
Source
Was this answer helpful?
Reviewed by our parts specialists from IMER manuals and parts books. Check the part number on your machine or in its parts book before you order. Not sure? Ask a parts specialist.