The IMER Combicut 200 VA is a lightweight overhead rail wet tile saw, model number 1188084, for cutting tile, stone and porcelain. It runs an 8 in blade on a 5/8 in shaft at 2800 rpm, driven by a 1.75 hp, 120 V, 15 amp single-phase motor. Maximum cutting length is 21 in, or 24 in with a plunge cut, and maximum cutting depth is 2.75 in.

The cast aluminum cutting head pivots on a sealed bushing for plunge cuts, and tilting the travel beam gives 45 degree cuts. A high flow water pump (3 gpm) with a water valve controls the water mist, and the removable high impact poly water pan with baffles holds 5 gal.

Standard equipment includes an 8 in continuous rim porcelain blade, side table, 180 degree protractor and folding stand. The saw comes assembled, and the stand needs only 2 bolts. It weighs 48 lbs (68 lbs boxed) and measures 35 x 18 x 19 in (L x W x H). It suits rental stores, professional installers, contractors and do-it-yourself users. Replacement blade: part 1193920, 8 in x .060 continuous rim for porcelain and hard materials.