Reviewed by parts specialists

Answers about IMER machines and parts

Real questions about IMER mixers, mortar pumps, saws and lifts, answered from IMER manuals and parts books, with the part numbers and drawings that go with them.

answers: 69
machines covered: 37

Genuine IMER OEM parts
Fit checked

Machine not working right? Troubleshooting guides from the IMER manuals

3 answers in Troubleshooting

My three-phase Step-Up 120 keeps stopping during work. What should I check?
The three-phase Step manual lists these display messages and fixes. Material pressure on the screw too high: reduce the flow rate before restarting, and look for too…
Troubleshooting · IMER Step-Up 120
The Step-Up 120 compressor keeps starting, or it starts but the screw does not turn. Why?
When the compressor keeps restarting although the air tap at the spray jet is shut, the manual blames a pierced air tube or a leaking coupling. Fit new gaskets, seal…
Troubleshooting · IMER Step-Up 120
My single-phase Step-Up 120 will not start and the display shows dashes. Why?
The manual separates two cases on the single-phase Step-Up 120. When nothing runs, neither machine nor compressor, and the blue lamp is dark, look at the site panel…
Troubleshooting · IMER Step-Up 120

Didn't find your answer? Ask a parts specialist

We reply by email, from IMER manuals and parts books. Questions are not published.

Answers describe what IMER manuals and parts books say. Check the part number on your machine or in its parts book before you order, or send a photo of the serial plate.

Step 1: Family

Step 2: Model

Step 3: Assembly

Machine families

Featured machines

Answers about IMER machines and parts

3 answers in Troubleshooting

My three-phase Step-Up 120 keeps stopping during work. What should I check?

The Step-Up 120 compressor keeps starting, or it starts but the screw does not turn. Why?

My single-phase Step-Up 120 will not start and the display shows dashes. Why?

Didn't find your answer? Ask a parts specialist